SCP Fillerboards

SCP Membrane

Download our Datasheets here

Bituflex
Expansionthene
Heavy Duty Expansionthene
Bitusheet Protection Board

SCP Filler and Protection Boards are available to suit a variety of uses, further details are given here and Datasheets are available from the menu on the left.

  • Fillerboards
  • Bituflex
  • Expansionthene
  • Bitubond
  • Resin bonded
  • Heavy Duty
  • Accessories

SCP Expansion fillerboards

We provide a range of fillerboards to suit any construction requirement, including brickwork, isolation and perimeter expansion joints. For water retaining structures and where there is trafficked hardstanding, as well as for sewage treatment structures.

Use the tabs above to read more about our range of fillerboards.

 

SCP Bituflex Bitumen Impregnated Wood Fibre Fillerboard

Description:

Bituflex is a low cost, general purpose joint filler consisting of compressed wood fibre material, impregnated with bitumen emulsion. It complies with DOE (previously MoPRV) General Specification No. 201, Clause 606, and ASTM D. 1751.

Uses:

Bituflex is used as a general purpose expansion joint filler in non critical joints in concrete slab and brick wall construction.

Sizes

Thickness 10mm 12mm 19mm 25mm
Sheet Size 2.44m x 1.22m
Cut Strips 150mm 175mm 200mm other widths to order

Technical Data

Complies with: U.S. Federal Specification HH-FO341a Type 1, Class B
  D.O.E. General Specification No. 201, Clause 606
  Weathering Test Method 800/V.C.1.3
  ASTM D1751 - Compression & Recovery test
  D.o.T. Specification for Highway Works Part 3: Clause 1015:1991
  B.S. 1142

Typical Test Results

Specimen No. 1 2 Specification
Load required to compress specimen
to 50% of pre-test thickness
1.93N/mm 2 1.78N/mm2 0.7-10.0N/mm2
Recovery (% of pre-test thickness) 82% 81% not less than 70%

Compression & Recovery Test (Test Method 800/V.C1.4)

The specimens tested complied with the Weathering and Compression and Recovery Requirements.

For more information click here for our Datasheet or our Installation Guide.

SCP Expansionthene Closed Cell Expanded Polyethylene Expansion Joint Filler

Description

Expansionthene is a Closed Cell Expanded Polyethylene Foam supplied in sheet form or cut to slab depth/wall thickness as required. High Performance Expansion Joint Fillerboard, for concrete slab construction and brickwork joints, which is supplied pre-cut to depth of sealant for controlled void formation and easy removal.

Robust, non-absorbent with excellent recoverability of 100% from 50% compression, low load transfer, non extruding and resistant to attack by most acids and alkalis.

Uses

Joint Detail Installations Projects
Expansion Joints Concrete Slab Construction Warehouse, Factories,
Hardstandings
Isolation Joints Concrete Slab Brickwork Warehouses, Factories
Expansion Joints Brickwork Blockwork Warehouses, Factories,Commercial Buildings

Sizes

Thickness Stock Widths
10mm 100mm
12mm 150mm
15mm 175mm
20mm 200mm
25mm  

Other widths available to order between 25mm x 1500mm in 25mm increments.
Standard full sheet size 2.20m x 1.50m.

Technical Data

Meets the Department of Transport Specification for Highway Works Part 3: Clause 1015 - 1991

Property Unit Din Standard No Typical Value
Tensile Strength Kp/cm2 53571 2.6
Elongation % 53571 85
Water absorption after 7 days Vol. % 53428 Negligible
Recovery from 50 compression
Immediate release % 53572 100
After 25 hours % 53572 90.4

For more information click here for our Datasheet or our Installation Guide.

SCP Bitubond Cork Joint Filler

Description

Bitubond Cork fillerboard consists of granulated cork, premixed and securely bonded together with a hot bituminous mixture, evenly formed between two sheets of heavy asphalt - saturated felt paper.

Bitubond Cork fillerboard is highly resilient, water resistant, and can be easily handled without breakage. It is Non-Extruding, rot proof, with a recovery rate of over 80% following 50% compression, and is highly resistant to insect, fungal and bacterial attack.

Uses

Bitubond Cork Expansion joint filler is recommended for use in concrete paved areas where heavy trafficking is expected.

Sizes

Thickness: 10mm 12mm 20mm 25mm
Sheet size: 2.13m x 0.914m

Technical Data

Property Specification Result
Resistance to handling Atmosphere conditions/no deformation, breaking Complies
Compression/weight loss 100-750 psi 3% max Complies
Extrusion 0.25" max Complies
Recovery 80% min Complies
Density 19 lb/cf min Complies
Water absorption 15 vol % max Complies
Asphalt content 35% wt min Complies
Weathering No disintegration Complies

For more information click here for our Datasheet.

SCP Resin Bonded Cork Joint Filler

Description

Cork Granules bound together with synthetic resin. This material contains no bitumen or similar compounds and will not contaminate joint faces.

Uses

Resin Bonded Cork Joint Filler is recommended as a joint filler for expansion joints in reinforced concrete water retaining structures, ie. sewage treatment works, swimming pools, sea walls and similar structures.

Sizes

Thickness 12mm 20mm 25mm
Sheet Size 610mm x 915mm

Technical Data

Resin bonded cork conforms with the requirements of the following specifications: DOE (previously MOPBW) General Specification No. 201 Clause 606 US Federal Specification HH-F0341a Type II Class B. ASTM Specification D1752-60T Type II.

Property Typical Value
Load at 50% compression 0.54 N/mm2 (78 lbs/in2)
Recovery after 50% compression 96% of original thickness
Heat resistance Satisfactory
Weathering Test No deterioration at 150°C
Insolubility Test No disintegration after 1 hour in boiling hydrochloric acid


For more information click here for our Datasheet.

SCP Heavy Duty PW Joint Filler

Description

Expansionthene PW is a specially formulated high performance non absorbent, rot proof, closed cell cross linked Polyethylene Foam joint filler supplied in sheets or cut strips as required.

Uses

It is recommended for use in expansion joints in water retaining and water excluding structures, floor slab construction, bridge joints and road expansion joints. Expansionthene PW is particularly suitable for use in expansion joints in potable water reservoirs and is listed by the United Kingdom Water Fittings Byelaws scheme for use with potable water.

Sizes

Thickness Sheet size
10mm 1.5m x 2.2m
12mm 1.5m x 2.2m
15mm 1.5m x 2.2m
20mm 1.5m x 2.2m
25mm 1.5m x 2.2m

Can be supplied in cut strips to suit slab/wall thickness with an undercut on one edge to form sealant void former.

Technical Data

Property Typical Value
Tensile Strength 470KN/m2
Elongation at break 110%
Tear strength 85N
Compressive strength  
25% 68KN/m2
50% 154KN/m2
Recovery 50% compression  
Immediate release 100%
Typical after 100 hours 86%
Extrusion  
Three edges restrained 50% compression No extrusion
Weathering No Disintegration
Chemical resistance  
Acids (except concentrated nitric) Resistant
Alkali Resistant
Oils Resistant
Resistance to bacteria attack Very good
DoT Specification for Highway Works Part 3: Clause 1015:91 Complies

For more information click here for our Datasheet.

SCP Accessories

Joint Filler Adhesive

Joint Filler Adhesive is a specially formulated rubber based one part adhesive compatible with most commonly used building materials.

Joint Filler Adhesive is designed to provide good adhesive properties for fixing SCP Joint Filler Boards and Protection Boards to prepared surfaces including concrete, brickwork and previously applied Bitusheet Membranes. Supplied in 5 litre Cans.

Contact us for more information on +44(0)7973 907063